The TEC 6300 Pneumatic/Electric Hot Melt Spray Glue Gun is a unique, economic spray applicator that makes hotmelt applications affordable for everyone. Built to a very high standard, the TEC6300 is a totally self-contained unit, requiring only compressed air and electricity to operate.  There are no expensive bulk tanks or fragile heated hoses to go wrong.

The TEC6300 takes only 10 minutes to warm up from cold and is fast and safe to reload using 43mm (1-3/4" x 1-3/4")  TECBOND adhesive cartridges.

500watt Pneumatic Hot Melt Spray Adhesive Applicator

Produces up to 11Lbs of hot melt per hour

Uses 1-3/4" x 1-3/4" (43mm) Loctite, Hysol, TecBond Polyshot

It is the highest output, hand-held industrial hotmelt spray glue gun available.  Capable of dispensing up to 4.2 kilos of molten hotmelt per hour, the TEC6300 is ideal for covering areas up to about one metre square at a time. It can also be used on heat-sensitive substrates, such as expanded polystyrene and other plastic foams.  A range of specially formulated spray formulations are available to suit most applications. 

This system is totally solvent-free and non-toxic, so there are none of the environmental problems that are often associated with other spray adhesive glue guns.

TEC 6300/4

$769.00