The TEC 7100 is one of a series of new generation pneumatic hotmelt applicators. Probably one of the world’s highest-output hand-held hotmelt applicators, the TEC 7100 is a serious alternative to bulk tank hotmelt systems at a fraction of the cost.

Built to a very high standard, the TEC 7100 is totally self contained. The most unique feature on this tool is the built-in speed loader, which holds an extra two 43mm glue cartridges in reserve, and enables the machine to be re-loaded in seconds.

Due to the advanced heater housing design and the powerful dual 500 watt heaters, the TEC 7100 is able to dispense up to 5 kilos of molten hotmelt per hour.

Operating temperature is obtained in only 5 minutes from cold via one of the 500 watt cartridge heaters, then when the trigger is pulled for use, the second 500 watt heater comes into operation and enables the molten adhesive to be dispensed at a constant temperature.

Melt Rate: up to 5 kg/hr depending on adhesive and temperature

Uses: TECBOND 43mm adhesive slugs

The standard tool TEC7100/4 comes fitted with a 3m (9ft) cordset.

If an extended cordset is required, then a specially adapted gun can be purchased with no cordset, plus a 6M or 12M extension cordset that is purchased as an extra. Please click on this link for full details.

1,000 watts of Heating Power!

TEC 7100/4

$829.00

ADD040/4/6M*20ft

20 ft Airline & Electrical Cordset Adapter

for TEC7000-Series Tools, 6m

$184.00

ADD040/4/12M*40ft

40 ft Airline & Electrical Cordset Adapter

for TEC7000-Series Tools, 12m

$225.00

Speed Load

High Output

Click for TecBond Glue

 Accessories